|
| |
K - 706 Glass to Inject Photo / Metal
|
|
|
| |
Technical Data K706
Glass to Inject Photo / Metal
UV based optically clear, low viscous.
Base
• Modified urethane acrylate
• Single component, Solvent less liquid
Use
• To be used for bonding glass to Inject Photo / Metal
• Not to be used for Glass to Plastic bonding.
|
|
• This product is normally used in a temperature range of -20° C to +100° C;
depending on the application, other limits may be more reasonable
• Very good capillary properties
Processing
• Supplied ready for use and can be processed well from the original container or we can custom size the packaging as per your requirement.
• The surface to be bonded must be dry as well as free of dust, grease and other contaminations
• For further information on how to apply, please see the Application Method. |
Technical Data:
Specification |
K-706 Glass to Inkjet Photo |
Appearance |
Optically Clear |
Viscosity @ 25°C By F-Cup – B - 4 |
32 to 37 |
Flash Point |
>100°C |
Specific Gravity @ 25°C |
1.074 |
Refractive Index |
1.52 @ 25°C |
Full Curing Time |
55-60 Sec |
Shelf Life (Unopened) |
1 Year |
Curing
Using UV light with a wavelength of 320 – 400nm.
Click hear to download the Technical Data Sheet 
Click hear to download the Material Safety Data Sheet
See the Application Data Sheet for more information on how to use KEY BOND UV Adhesive. These are all vital steps to be taken for the final strength of the bond.
For any further inquiries and pricing please Contact us.
|
|
| |
|
|
|
